Jump to content
British Speedway Forum
robert314

Speedway Parts For Sale

Recommended Posts

Here I'am selling all of my speedway stuff which I have, clearing the workshop of all my speedway gear as I have no use for it now due to other commitments and Injury.

 

OPEN TO ALL OFFERS NOT LOOKING FOR SILLY AMOUNTS OF MONEY BUT REALISTIC OFFERS PLEASE.

 

1 JAWA 889 laydown engine - Short stroke, 40 races from new, fresh from service.

 

1 JAWA laydown rolling chassis - Renthal motorcross bars, Magura clutch lever and throttle, JAWA clutch and countershaft, Regina chains.

1 JAWA laydown Diamond (with oil plug at headstock for chain oiler) - Without headstock bearings,straight,1 weld next to where it bolts onto engine.

1 JAWA laydown Diamond (with oil plug under seat for chain oiler) - Straight.

1 JHR laydown Diamond (with oil plug under front seat bracket hole) - Without headstock bearings, straight.

1 set of JAWA leading link forks - Straight.

 

1 Upright Diamond - Straight

1 JHR backend

1 PJ frames backend

1 jawa curved backend

1 set of upright forks - Straight

2 JAWA laydown tanks

1 JHR laydown tank

1 complete JAWA clutch and countershaft (almost new has done 30 races)

1 set of JAWA engine plates

2 Blue laydown chain guards (1 JOBA, 1 John Shirt)

1 set of chrome speedway handlebars - Straight.

1 King silencer (no date stamp)

1 Chain guide (almost brand new)

2 rear wheel spoilers (1 Fluro Orange, 1 Blue with white edge)

1 rear mudguard (square type, blue with white edge)

1 chrome rear push bar

2 rear chainguards (1 blue with white edge, 1 glitter blue with glitter silver edge)

1 Magura 314 throttle

1 silver JAWA throttle

2 Magura throttles (1 Black, 1 Silver)

2 Magura Clutch levers

4 JAWA Clutch arms (2 brand new, 2 used)

1 NEB Clutch arm

1 converted Dellorto laydown carb

1 15T Talon GM engine sprocket

1 17T Talon GM Engine sprocket

1 17T JAWA Engine sprocket

1 16T JAWA Engine sprocket

2 15T Countershaft sprockets

2 JAWA Cutouts

1 back wheel spindle

1 Set of JAWA handlebar clamps (silver)

2 Chain oilers

1 GM inlet manifold rubber

2 Blue venhill throttle cables

1 Grey throttle cable

2 JAWA header pipes

56, 57, 2x 58, 59, 60, 62, 2x 63, 64 rear sprockets

2 clutch centers

1 used k&N air filter for Blixt carb

number of different clutch mushrooms and push rods, clutch cups and screws

number of different frame spacers

JAWA chainguard bracket

 

1 Completes set of Milaniak covers Fluro Yellow and Blue vinyl were Brand new last season very good condition (Fork cover, GP style cover and Seat)

1 complete set of Smith products Blue with white edge astro nylon covers good condition (fork cover, clutch arm cover and GP style cover has small hole just above silencer)

1 Red with yellow stripe at top bike transport cover

1 Black with blue edge bike transport cover

Share this post


Link to post
Share on other sites

Here I'am selling all of my speedway stuff which I have, clearing the workshop of all my speedway gear as I have no use for it now due to other commitments and Injury.

 

OPEN TO ALL OFFERS NOT LOOKING FOR SILLY AMOUNTS OF MONEY BUT REALISTIC OFFERS PLEASE.

 

1 JAWA 889 laydown engine - Short stroke, 40 races from new, fresh from service.

 

1 JAWA laydown rolling chassis - Renthal motorcross bars, Magura clutch lever and throttle, JAWA clutch and countershaft, Regina chains.

1 JAWA laydown Diamond (with oil plug at headstock for chain oiler) - Without headstock bearings,straight,1 weld next to where it bolts onto engine.

1 JAWA laydown Diamond (with oil plug under seat for chain oiler) - Straight.

1 JHR laydown Diamond (with oil plug under front seat bracket hole) - Without headstock bearings, straight.

1 set of JAWA leading link forks - Straight.

 

1 Upright Diamond - Straight

1 JHR backend

1 PJ frames backend

1 jawa curved backend

1 set of upright forks - Straight

2 JAWA laydown tanks

1 JHR laydown tank

1 complete JAWA clutch and countershaft (almost new has done 30 races)

1 set of JAWA engine plates

2 Blue laydown chain guards (1 JOBA, 1 John Shirt)

1 set of chrome speedway handlebars - Straight.

1 King silencer (no date stamp)

1 Chain guide (almost brand new)

2 rear wheel spoilers (1 Fluro Orange, 1 Blue with white edge)

1 rear mudguard (square type, blue with white edge)

1 chrome rear push bar

2 rear chainguards (1 blue with white edge, 1 glitter blue with glitter silver edge)

1 Magura 314 throttle

1 silver JAWA throttle

2 Magura throttles (1 Black, 1 Silver)

2 Magura Clutch levers

4 JAWA Clutch arms (2 brand new, 2 used)

1 NEB Clutch arm

1 converted Dellorto laydown carb

1 15T Talon GM engine sprocket

1 17T Talon GM Engine sprocket

1 17T JAWA Engine sprocket

1 16T JAWA Engine sprocket

2 15T Countershaft sprockets

2 JAWA Cutouts

1 back wheel spindle

1 Set of JAWA handlebar clamps (silver)

2 Chain oilers

1 GM inlet manifold rubber

2 Blue venhill throttle cables

1 Grey throttle cable

2 JAWA header pipes

56, 57, 2x 58, 59, 60, 62, 2x 63, 64 rear sprockets

2 clutch centers

1 used k&N air filter for Blixt carb

number of different clutch mushrooms and push rods, clutch cups and screws

number of different frame spacers

JAWA chainguard bracket

 

1 Completes set of Milaniak covers Fluro Yellow and Blue vinyl were Brand new last season very good condition (Fork cover, GP style cover and Seat)

1 complete set of Smith products Blue with white edge astro nylon covers good condition (fork cover, clutch arm cover and GP style cover has small hole just above silencer)

1 Red with yellow stripe at top bike transport cover

1 Black with blue edge bike transport cover

 

hay mate can you contact me about your parts brtsracing@yahoo.com.au cheers

Share this post


Link to post
Share on other sites

Here I'am selling all of my speedway stuff which I have, clearing the workshop of all my speedway gear as I have no use for it now due to other commitments and Injury.

 

OPEN TO ALL OFFERS NOT LOOKING FOR SILLY AMOUNTS OF MONEY BUT REALISTIC OFFERS PLEASE.

 

1 JAWA 889 laydown engine - Short stroke, 40 races from new, fresh from service.

 

1 JAWA laydown rolling chassis - Renthal motorcross bars, Magura clutch lever and throttle, JAWA clutch and countershaft, Regina chains.

1 JAWA laydown Diamond (with oil plug at headstock for chain oiler) - Without headstock bearings,straight,1 weld next to where it bolts onto engine.

1 JAWA laydown Diamond (with oil plug under seat for chain oiler) - Straight.

1 JHR laydown Diamond (with oil plug under front seat bracket hole) - Without headstock bearings, straight.

1 set of JAWA leading link forks - Straight.

 

1 Upright Diamond - Straight

1 JHR backend

1 PJ frames backend

1 jawa curved backend

1 set of upright forks - Straight

2 JAWA laydown tanks

1 JHR laydown tank

1 complete JAWA clutch and countershaft (almost new has done 30 races)

1 set of JAWA engine plates

2 Blue laydown chain guards (1 JOBA, 1 John Shirt)

1 set of chrome speedway handlebars - Straight.

1 King silencer (no date stamp)

1 Chain guide (almost brand new)

2 rear wheel spoilers (1 Fluro Orange, 1 Blue with white edge)

1 rear mudguard (square type, blue with white edge)

1 chrome rear push bar

2 rear chainguards (1 blue with white edge, 1 glitter blue with glitter silver edge)

1 Magura 314 throttle

1 silver JAWA throttle

2 Magura throttles (1 Black, 1 Silver)

2 Magura Clutch levers

4 JAWA Clutch arms (2 brand new, 2 used)

1 NEB Clutch arm

1 converted Dellorto laydown carb

1 15T Talon GM engine sprocket

1 17T Talon GM Engine sprocket

1 17T JAWA Engine sprocket

1 16T JAWA Engine sprocket

2 15T Countershaft sprockets

2 JAWA Cutouts

1 back wheel spindle

1 Set of JAWA handlebar clamps (silver)

2 Chain oilers

1 GM inlet manifold rubber

2 Blue venhill throttle cables

1 Grey throttle cable

2 JAWA header pipes

56, 57, 2x 58, 59, 60, 62, 2x 63, 64 rear sprockets

2 clutch centers

1 used k&N air filter for Blixt carb

number of different clutch mushrooms and push rods, clutch cups and screws

number of different frame spacers

JAWA chainguard bracket

 

1 Completes set of Milaniak covers Fluro Yellow and Blue vinyl were Brand new last season very good condition (Fork cover, GP style cover and Seat)

1 complete set of Smith products Blue with white edge astro nylon covers good condition (fork cover, clutch arm cover and GP style cover has small hole just above silencer)

1 Red with yellow stripe at top bike transport cover

1 Black with blue edge bike transport cover

hello could you contact me about parts please chrisnaylors@yahoo.co.uk i cant pm you????

Share this post


Link to post
Share on other sites

Here I'am selling all of my speedway stuff which I have, clearing the workshop of all my speedway gear as I have no use for it now due to other commitments and Injury.

 

OPEN TO ALL OFFERS NOT LOOKING FOR SILLY AMOUNTS OF MONEY BUT REALISTIC OFFERS PLEASE.

 

1 JAWA 889 laydown engine - Short stroke, 40 races from new, fresh from service.

 

1 JAWA laydown rolling chassis - Renthal motorcross bars, Magura clutch lever and throttle, JAWA clutch and countershaft, Regina chains.

1 JAWA laydown Diamond (with oil plug at headstock for chain oiler) - Without headstock bearings,straight,1 weld next to where it bolts onto engine.

1 JAWA laydown Diamond (with oil plug under seat for chain oiler) - Straight.

1 JHR laydown Diamond (with oil plug under front seat bracket hole) - Without headstock bearings, straight.

1 set of JAWA leading link forks - Straight.

 

1 Upright Diamond - Straight

1 JHR backend

1 PJ frames backend

1 jawa curved backend

1 set of upright forks - Straight

2 JAWA laydown tanks

1 JHR laydown tank

1 complete JAWA clutch and countershaft (almost new has done 30 races)

1 set of JAWA engine plates

2 Blue laydown chain guards (1 JOBA, 1 John Shirt)

1 set of chrome speedway handlebars - Straight.

1 King silencer (no date stamp)

1 Chain guide (almost brand new)

2 rear wheel spoilers (1 Fluro Orange, 1 Blue with white edge)

1 rear mudguard (square type, blue with white edge)

1 chrome rear push bar

2 rear chainguards (1 blue with white edge, 1 glitter blue with glitter silver edge)

1 Magura 314 throttle

1 silver JAWA throttle

2 Magura throttles (1 Black, 1 Silver)

2 Magura Clutch levers

4 JAWA Clutch arms (2 brand new, 2 used)

1 NEB Clutch arm

1 converted Dellorto laydown carb

1 15T Talon GM engine sprocket

1 17T Talon GM Engine sprocket

1 17T JAWA Engine sprocket

1 16T JAWA Engine sprocket

2 15T Countershaft sprockets

2 JAWA Cutouts

1 back wheel spindle

1 Set of JAWA handlebar clamps (silver)

2 Chain oilers

1 GM inlet manifold rubber

2 Blue venhill throttle cables

1 Grey throttle cable

2 JAWA header pipes

56, 57, 2x 58, 59, 60, 62, 2x 63, 64 rear sprockets

2 clutch centers

1 used k&N air filter for Blixt carb

number of different clutch mushrooms and push rods, clutch cups and screws

number of different frame spacers

JAWA chainguard bracket

 

1 Completes set of Milaniak covers Fluro Yellow and Blue vinyl were Brand new last season very good condition (Fork cover, GP style cover and Seat)

1 complete set of Smith products Blue with white edge astro nylon covers good condition (fork cover, clutch arm cover and GP style cover has small hole just above silencer)

1 Red with yellow stripe at top bike transport cover

1 Black with blue edge bike transport cover

Share this post


Link to post
Share on other sites

Can you email me pics of:

 

1 JAWA laydown rolling chassis - Renthal motorcross bars, Magura clutch lever and throttle, JAWA clutch and countershaft, Regina chains.

 

woodeecouk at yahoo.co.uk

 

Thanks

Share this post


Link to post
Share on other sites

Hi,

 

am looking for Jawa diamond, forks and possibly a front wheel. Alternatively a rolling chassis.

Please send me a couple of pics and what price you are asking,

 

 

speedwayteamspiller@freenet.de

 

Cheers

Share this post


Link to post
Share on other sites

I have just started making a few speedway products currently I have wheel balancers foot pegs also spolier clamps which is fixed so the spoiler is still great for a quick change of back wheel and brilliant for sponsors I've sold quite a few of each products the price is a lot lower than other sellers. All work is CNC machined and the material is top grade all products I make are down to a very high tolerance. Feel free to email me chriseaton1988@icloud.com.

  • Like 1

Share this post


Link to post
Share on other sites

interested in a throttle, a cut out, rear wheel spindle and 17 gm engine sprocket and possibly the Dellorto.

Would you PM me please?

Share this post


Link to post
Share on other sites

Hi Robert, sent you a PM.

 

Interested in quite a bit of your stuff for sale, you can get me on 07976 424145 or info@speedwayridenslidedayz.com

 

Look forward to hearing from you.

 

Cheers, Russ

Share this post


Link to post
Share on other sites

I have just started making a few speedway products currently I have wheel balancers foot pegs also spolier clamps which is fixed so the spoiler is still great for a quick change of back wheel and brilliant for sponsors I've sold quite a few of each products the price is a lot lower than other sellers. All work is CNC machined and the material is top grade all products I make are down to a very high tolerance. Feel free to email me chriseaton1988@icloud.com.

Share this post


Link to post
Share on other sites

I have just started making a few speedway products currently I have wheel balancers foot pegs also spolier clamps which is fixed so the spoiler is still great for a quick change of back wheel and brilliant for sponsors I've sold quite a few of each products the price is a lot lower than other sellers. All work is CNC machined and the material is top grade all products I make are down to a very high tolerance. Feel free to email me chriseaton1988@icloud.com.

 

I have just started making a few speedway products currently I have wheel balancers foot pegs also spolier clamps which is fixed so the spoiler is still great for a quick change of back wheel and brilliant for sponsors I've sold quite a few of each products the price is a lot lower than other sellers. All work is CNC machined and the material is top grade all products I make are down to a very high tolerance. Feel free to email me chriseaton1988@icloud.com.

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy