Deanomachino

also Laguta was spinning his back wheel before the tapes went up ,is that why he doesn't use a spoiler ??

it's known as the hokey kokey rule ,it's in then out , 2 years ago Britain said it was a safety issue then last year it wasn't and this year it is again ,

try jack lee , (ex Buxton TM and now Sheffield TM) he rode for Nelson , he is on here as Rider Slider

Sorry mate sold about an hour ago

For me it's going to be NKI or Nicki but I will put a few £ on bomber

yes most do but I've recently brought a weslake from 1979 and a GM from 1992 and neither had been run since and inside they were solid because the castor oil had been left in and gone hard basically eating the parts

Caster oil is still used in speedway but not castrol so much , it's mainly rock, beeline or Morris and a few others , castor oils problem as I have found out recently since restoring old bikes is that if it sits for years without use it goes hard and ruins the parts of the engine

I'm trying to express my views as a fan and the reason I oppose so many things that the Bspa/SCB introduce is because they are no good but it dosent really matter if I like them or not the fact is 1000s have deserted the sport over the last few years and then we get revolutionary ideas like changing a helmet colour because "we have listened to the fans" . I know I boil the piss of promoters with my views because some have told me so but that doesn't make me wrong , I don't have a problem with anybody making money out of the sport as long as they put something back in , I know promoters put a lot back in but they won't speculate to acumulate (understandable maybe) but until it happens the sport won't go anywhere and all their decisions are short term plaster over ideas instead of future prospect , the sport needs to go one of two ways , either make it like F1 and all money and glamour with someone like Bernie exclestone at the helm and alienate its current fan base but apeal to a new breed of fan or it needs to take s step back to the garden shed type sport it has always been and go that that root making the sport cheaper for riders and fans and try to attract the former fans back who have become fed up with the current version of the sport which has become too expensive for itself and has a bit of "its a knockout" feel about it with stupid rules and formats, I would prefer the step back because to me that's what speedways apeal is and has always been but whichever way it goes we can't stay as we are

thanks for kinds words lol ,nobody is fleecing me , I have done ok out of speedway I only have a small finacial intrest in speedway and that with my intrest is ending because it has just worn me down to the point where I just don't care anymore

, it's not just promotors making money but while the sport is on deaths door some are sitting on the Ivory towers making a good living at it , I apreciate that it's not everyone , I know one person who is making nothing in it and to be honest I think it's taking toll on his health but he won't walk away

Stoke and Swindon and others , how many years was Leigh Adams and others owed money? and Swindon still run, clubs lose money , promotors don't , apart from his reputation in speedway the ex Birmingham promotor is still doing ok for himself and isn't going to be appearing on the next series of Benifit St anytime soon

I believe he is doing it for travel expenses only

I wasn't there so I have only heard second hand account but I believe they rode ok but there was some issues with vibration

it's already been done by riders far better than me in Poland

The 2valve that jawa are producing is not like the old one from the 70s , it looks similar to the current model , I'm not sure why it's 570cc , it was explained to me , something to do with future environmental issues ? but with cooperation from all countries this could be the way to make speedway about the rider again and not about the tuner which sadly it is becoming

I have been to an AGM , you pitch an idea that would be good for speedway but the rewards are further down the line you will get nowhere , put an idea that's instant £s in promotors pockets and it's done deal ,I suppose it's understanderble but it's not helping the sport , contary to what people say there is plenty of money in speedway for the lucky few

the fact that it is only 2 valve mean it won't rev as hard and if nothing else your saving on the price of 2 valves and 2 springs and that's a saving of £150 straight away , jawa are making a 570cc version , with some input from the right people parts can be made for durability and all this can be done at the right price and the proper control from SCB as to parts and tuning through holomagation , unfortunately greed and a selfishness means it won't happen

Buts it's not to small for jawa who already produce a 2valve ice racing engine in either upright or laydown that has been adapted and tested for speedway the answer is already there in front of our very eyes ,shame we are to stubborn or stupid to see it

yea it would be good but it simply won't happen , apart from parts failing other parts like rings wear and carbon builds up and these things all lesson performance so they will still need serviimg and you can bet if an engine costs £6000 it's parts will also be expensive , the new silencers and everyone will. Be using them will lengthen service intervals

in the last 5 years I rode I had 2 blow ups and one of those was because I went out with a cold engine , I used GMs with GM bits , I used 1rod 1 piston per engine per season ,that in my book is as reliable as is possible for any race engine ,at the same time i have a couple of mates that race ktm 250 motox and they have around 5 blow up per year although some were gearbox and some cause by cracked cases, you say poor materials but the rods Pistons and valves which are the parts that fail are made by the same company's and the same materials as other motorsports

yes spread over 4 cilinders with a Rev limiter and a gearbox, you put all that power into one pot with no Rev limiter it will blow , motox engines regularly blow up and at half the revs of a speedway engine

really ,I guess it's just speedway where engines blow up ? ALL motorsports suffer blow ups and regularly no matter who makes the engines or what oil pump they use, cut the revs if you want more reliability

Just been reading Guy Martins book , see how many engine blow ups he has had in the last 5 years and these engines are all made by the leading manufacturers, it doesn't matter if you fit a better oil pump or even an oil refinery to the engine ,race engines blow up and to claim an engine will last all season is pure fantasy

[quote name="theknow 2" post="2561348" timestamp="1420193801 Competion with more engine makers should bring the cost downThe main issue is the GM engine is not a good product from the factory it should bring the price down but it won't and the GM microlight engines are pretty much the same in design although not in size and I don't see them falling from the skies ,to be honest I never really had reliability problems with my GMs but I never really tried to get every last bit of speed out of them, a company who I do work for are a motox family and when I was still racing they were having more blow ups than me and I was riding more often

unless they have discovered some new materials on Mars that the Pistons valves and rods etc are going to be made from they are still going to blow up ,you could cut the service time by using the jawa idea which would be around a 5th of the cost to buy in the 1st place ,race car teams all round the world have all the best brains on the planet and spend millions and their engines still blow up , we have become a sport dictated to by the "tuner" and it's got to stop , I'm sure this bloke with this new engine is s nice bloke and is very intelligent but he is not doing this for the Benifit of the sport he is doing this to make himself money ,which is ok for him but as with most parts we use now they just double in price ,the service is mainly big end bearings ,rings and since the new silencers the valve springs ,has he invented a new big end bearing that can withstand the sort of revs speedway produces ? I have been around speedway to long and know how prices get inflated and this has that written all over it I've said it before but speedway is a garden shed type sport and the further we get away from that the less the public buy into it , mechanical progress is all well and dandy but the fan on the terraces just doesn't care